UNIDENTIFIED

IDEPLUS-V4L

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE(AT) interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                      CONNECTIONS

               Function                   Location

  40-pin IDE(AT) connector                  CN1

  34-pin floppy drive connector             CN2

  10-pin serial port 1 - internal           CN3

  10-pin serial port 2 - internal           CN4

  16-pin game port                          CN5

  25-pin parallel port - external           CN6

  2-pin connector - drive active LED        JP12

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   IDE interface enabled             JP1/pins 1 & 2         closed

      IDE interface disabled            JP1/pins 2 & 3         closed

  »   Floppy drive enabled              JP2/pins 1 & 2         closed

      Floppy drive disabled             JP2/pins 2 & 3         closed

  »   Game port enabled                 JP3/pins 1 & 2         closed

      Game port disabled                JP3/pins 2 & 3          open

  »   IDE primary address is 1F0h       JP4/pins 1 & 2         closed

      IDE secondary address is 170h     JP4/pins 2 & 3         closed

  »   Floppy drive primary address      JP10/pins 1 & 2        closed
      is 3F0h

      Floppy drive secondary address    JP10/pins 2 & 3        closed
      is 370h

  »   IRQ14 enabled                          JP13              closed

      IRQ14 disabled                         JP13               open

                        SERIAL PORT 1 CONFIGURATION

           Address                    JP7                    JP8

  »        3F8h (COM1)         pins 1 & 2 closed      pins 1 & 2 closed

           3E8h (COM3)         pins 2 & 3 closed      pins 1 & 2 closed

            Disabled                  N/A             pins 2 & 3 closed

                        SERIAL PORT 2 CONFIGURATION

           Address                    JP5                    JP6

  »        2F8h (COM2)         pins 1 & 2 closed      pins 1 & 2 closed

           2E8h (COM4)         pins 2 & 3 closed      pins 1 & 2 closed

            Disabled                  N/A             pins 2 & 3 closed

                        PARALLEL PORT CONFIGURATION

           Address                    JP9                    JP11

  »        378h (LPT1)         pins 1 & 2 closed      pins 1 & 2 closed

           278h (LPT2)         pins 2 & 3 closed      pins 1 & 2 closed

            Disabled                  N/A             pins 2 & 3 closed

                     SERIAL PORT 1 INTERRUPT SELECTION

     IRQ           J6          J7          J8          J9          J10

  »      4        open      pins 2 &      open        open        open
                               3

         3      pins 2 &      open        open        open        open
                   3

         5        open        open      pins 2 &      open        open
                                           3

         7        open        open        open       pins 2 &     open
                                                        3

         9        open        open        open        open       pins 2 &
                                                                    3

  Note: Designated pins are in the closed position.

                     SERIAL PORT 2 INTERRUPT SELECTION

     IRQ           J6          J7          J8          J9          J10

  »      3      pins 1 &      open        open        open        open
                   2

         4        open      pins 1 &      open        open        open
                               2

         5        open        open      pins 1 &      open        open
                                           2

         7        open        open        open       pins 1 &     open
                                                        2

         9        open        open        open        open       pins 1 &
                                                                    2

  Note: Designated pins are in the closed position.

                     PARALLEL PORT INTERRUPT SELECTION

    IRQ          J1           J2          J3           J4          J5

  »     7       open         open        open        closed       open

        3      closed        open        open         open        open

        4       open        closed       open         open        open

        5       open         open       closed        open        open

        9       open         open        open         open       closed